Trend KWJ700 Kitchen Worktop Jig Inc Join Bolts 12.7 C153 Cutter Pair of Clamps

Stock Code:
KWJ700_KIT2

£126.95 £105.79
Add to Wish List
Out of Stock - This Product is Currently Unavailable

Description

The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up.

The jig has the following features:

Left and right hand corners, 400mm radius peninsular joint, 45° end cut with slight radius, 45° trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.

Engraved lines for 65mm bolts and worktop cross-cut.

6 x 10mm diameter ABS plastic pins with tapered shoulders for a tight fit and 3 point pin contact to ensure ease of setting up.

Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.
Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.
Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 635mm. 650mm and 700mm wide worktops.
Cuts up to 40mm thick worktops with or without anti-drip postformed edge.
Three open-ended bolt recesses (dog bone style) for 150mm bolts.
Engraved lines for short 65mm bolts and worktop cross-cut.
10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up.
Engraved markings for identification of pin holes.
Pins made from ABS plastic for strength.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter ref. GB30.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two clamps.

The KWJ700 has fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm worktops.

Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.
1/2in shank for heavier workloads, ideal for router table work and for use in bigger routers. The 'K' mark shank ensures safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick.
Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops.
Bottom cut feature for plunge work including stopped grooving and morticing applications.
PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices.
The Trend C153 x 1/2 TCT Two Flute Workshop Cutter has the following specification:

Cutting Diameter: 12.7mm (1/2in)
Cutting Depth: 50mm (2in)
Overall Length: 93.5mm
Shank Diameter: 1/2in

The Trend KWJ/P/TCL Pro Jig Track Clamps (Pair) are high quality clamps for Pro Workshop Jigs, track saw guide rails and any standard non track jigs.

Features

T Section works with KWJ Pro jigs and track saw guides, enabling a perfect fit to the jig and track guide slots
Durable forged steel fixed arm
The ergonomic wooden handle is shaped for comfort and maximum tightening
Fits 18mm MFT top allowing quick clamping
Provides 1800Nm clamping force for secure workpiece clamping
Clamps up to 160mm thickness, clamp thickness can be adjusted
Ball knuckle clamp head with a protective pad prevents marring protecting materials
Hardened alloy steel thread maintains torque for secure clamping
 
These Worktop Clamps eliminate the need for surface mounted worktop joining strips. The nut is tightened onto the bolt, pressing the caps against the walls of the 35mm diameter holes.
The clamps are Zinc plated for increased resistance to corrosion.
Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.
Panel butt connectors to connect worktop joints together. Saves time and money in assembling worktops.
Metal ended worktop connectors.

Requires 10mm A/F spanner to tighten.
3 x Metal ended worktop connectors

Compatibility: 8mm x 12mm T Slot Guide Rail Systems (Makita, Festool, Evolution, Triton) , Trend Jigs, Multi-Function Tables and Pro Pocket Hole Jigs

T slot guide rail systems include Makita, Festool, Evolution, Triton

Length: 985mm.
Width: 390mm.
Thickness: 12 mm.
Weight: 5.4 kg.
End Cut: 45°.
Corner Radii: 40mm, 100mm and 400mm.
Corner Mitre Joint: 45°.
Female cut material width loss: 35 mm.

Specifications

Type:Jig
Brand:Trend
Category:Postform & Kitchen Jigs
Height:1005mm
Width:20mm
Depth:400mm
Weight:5.8kg
MPN:KWJ700
EAN: 5055995594671

Trend Tool Technology

Trend are proud to offer a standard 12 month warranty on all products with the option to apply a free extended warranty upon registering.

Extended warranties are subject to registration. All registrations must be made within 28 days of purchase

To register your Trend product please click here.

 

Trend Warranty Extension

Warranty Terms & Conditions

All Trend Tools are carefully checked and tested to meet the stringent controls of Trend Quality Assurance. In addition to any statutory rights resulting from the purchase, all Trend products are covered by the warranty stated below.

WARRANTY PERIOD
The standard warranty period on all Trend products is 12 months (Warranty Period).
Products that are eligible for an extended Warranty Period, in accordance with Appendix A, are subject to registration here within 28 calendar days of purchase. The ‘Product Guarantee Certificate’ (supplied after successful registration) and original proof of purchase (showing purchase date) will serve as proof of the extended Warranty Period. Each tool must be registered separately.
The Warranty Period begins from the date the product is purchased. This date must be documented by the original proof of purchase.
Any claim made under this warranty does not alter the Warranty Period.
Trend reserve the right to grant an extended Warranty Period for products registered after 28 calendar days of purchase, in exceptional circumstances. Contact Trend Customer Services (+44 1923 249911 / customerservices@trend-uk.com) to discuss.

WARRANTY CONDITIONS
This Warranty is limited to repair and/or replacement of the faulty product provided that any fault in workmanship or material existed at the date of purchase. Where parts or products are no longer available, alternative products of a similar specification may be supplied. No further costs or losses can be claimed.
This warranty only applies to new product(s) purchased from an authorised Trend retailer.
This warranty is personal to the original purchaser and is non-transferable. Ownership must be documented by the original proof of purchase
All Warranty claims must be received by Trend (or a Trend Authorised Service Agent - UK only) within the Warranty Period.
Trend offer a collection service for Warranty claims made through Trend Customer Services (+44 1923 249911 / customerservices@trend-uk.com), but reserve the right to recover transportation costs for invalid claims.
Transportation costs and risks for returning products to a Trend Authorised Service Agent are not covered by this Warranty.
Where invalid Warranty claims may be repairable, Trend may offer an estimate for the cost of repair.

WARRANTY EXCLUSIONS
This warranty does not cover:

accidental or wilful damage;
products that have been altered or modified in any way;
products serviced or repaired by unauthorised Trend Service Agents;
products connected to improper power supply;
products with defaced, altered or removed identification labels;
damage caused by neglect, overloading or misuse;
damage resulting from improper or lack of maintenance;
damage caused by foreign substances;
damage caused by use of unauthorised and/or third-party parts and accessories;
parts and accessories which are subject to fair wear and tear;
consumable parts which are intended to be replaced during the life of the product as identified in the instruction manual;
counterfeit or stolen products;
minor deviations from the specified quality that do not affect the functionality or value of the product;
partially or completely disassembled tools.

What if my product becomes faulty?

If you have an issue with your Trend Power Tool within the first 30 days you can contact us at buyaparcel.com to resolve the problem.

After the 30 day period it is as simple as completing an online form with Trends certified repair agent.

They will happily arrange collection of the product and repair or replace it, depending on the fault found.

Please note you will need your proof of purchase from buyaparcel.com. We hold copies and can email these across at your request.

For further information on Trends warranty, please check the Trend Website.

Buyaparcel offer delivery throughout the United Kingdom, including Northern Ireland, Scottish Highlands and other Islands of the UK. In addition we can now also deliver through Europe. 

UK Delivery Prices 

Standard delivery is free with no minimum order charge to most mainland UK delivery addresses. Surcharges can apply to certain postcodes depending on the service type. For full details visit our Delivery Guide.

In additional to our standard service we also offer some premium delivery services if you need your item quickly

£0.00 - Standard UK Delivery (2-3 Days Approx)
£2.99 - Next Day UK Delivery (Orders placed before 3.00pm Monday - Friday)

*orders placed after 3.00pm Friday will still be delivered Monday if ordered before 11am Saturday Morning 


£8.99 - Saturday Delivery (Orders placed before 3.00pm Friday) 

£36.00 - Pallet Delivery (2-3 Days Approx - selected products only)

Alternatively if you view your parcel once items have been added and enter your postcode you will see what derlivery services are available.


International Delivery Prices 

In addition we now deliver through Europe on a 48 Hour Delivery Service as Standard 

Zone 1 – £9.99 
Belgium, Germany, Luxembourg, France, Netherlands, Rep Ireland. 

Zone 2- £14.99 
Austria, Denmark, Czech Republic, Poland, Lithuania, Hungary. 

Zone 3 – £19.99 
Estonia, Spain, Sweden, Italy, Portugal, Latvia. 

Zone 4 – £29.99 
Bulgaria, Finland, Romania. 

Zone 5 – £49.99 
Bosnia, Croatia, Switzerland. 

Zone 6 – £59.99 
Norway, Serbia, Iceland. 

Is My Item Available for Next Day Delivery? 

If your item is stocked in our immediate picking location it will available for you to choose a next day delivery. This will be highlighted by a green tick and a 1 day dispatch time on the item information. 

In stock - Available for next day delivery

You will have the option to choose this service if you are purchasing your item for delivery to mainland UK. 

What courier will my item be delivered with? 

If your item is being delivered in the UK or Ireland, it will be delivered by UK Mail/DHL, Hermes or Royal Mail, with the exception of pallet items. 

If you are an international customer, your goods will initially be sent via UK Mail/DHL, and then exported to either Eurodis or DHL. The appropriate tracking can be provided when necessary. 

Details of each courier service we offer are detailed in our Delivery Guide.

Is My Item Available for Click and Collect at your Lowestoft Store? 

Buyaparcel Click and Collect

In stock - Available for next day delivery

If your item is showing "In Stock" then you will be able to do a Same Day Click and Collect order from our Lowestoft Pinbush Road.  Our cut off for same day collections is 3.00pm Mon-Fri / 11.00am Saturday. After that the product will be ready the next day for collection. After the cut off you are welcome to do a Call and Collect order by phoning our trade counter on 01502 507666. If your item is in stock you will still be able to do a same day collection and payment. 

Our store is open Monday to Friday 8.00am - 5.00pm and Saturday 8.00am - 12.00pm so any orders placed the remainder of the weekend will be available for collection on Monday. Weekdays any orders placed up to midnight will be available for collection the following day. This excludes bank holidays.

Please wait for email confirmation your order is ready for collection from our store before you travel.

Buyaparcel Lowestoft Click and Collect

On collection we will require you to show a copy of your order confirmation, electronic or printed. In addition to this please bring photo ID which must be your passport or photo driving licence, matching the name on the PayPal/Amazon/Credit or Debit card used.

Collection option only available to NR and IP Postcodes

 

We've simplified our returns process! We now offer a no-questions-asked, free returns service within the first 30 days (subject to T&Cs).

You can find our returns information in our Terms and Help page

Spread the cost of your Buyaparcel purchase with Paypal Credit - Get 0% finance over 4 months! The perfect way to spread the cost of any purchases of £99 (inc vat) or more

Applying is that simple. If approved and you accept, you'll have a credit limit added to your PayPal account ready to use immediately. Plus, you'll automatically get 0% interest for 4 months on all your purchases of £99 or more.*

 


Spread the cost with PayPal Credit

 

How to apply for Paypal Credit with Buyaparcel?

You have 2 ways to purchase from us with the option us using Paypal Credit.

1 - From the product page you can use Paypal Express Checkout which will take you straight to your Paypal account where you can login to complete payment or apply for Paypal Credit. 

Buyaparcel Express Checkout

2 - If you add your product to your parcel and click "Proceed to Checkout" you will then go to our payment page. Select "Paypal Express Checkout" from the payment methods available and click "Place Order".

 Buyaparcel Finance - Paypal Credit

 

Once you are in your Paypal account choose PayPal Credit from the payment options.

Buyaparcel Paypal Credit - 4 Months Interest Free Finance

If this is the first time you have used PayPal Credit, you will be asked to complete a short application form to apply for PayPal credit.

Buyaparcel Finance Options

 

More Information on Paypal Credit

 

Write Your Own Review
You're reviewing:Trend KWJ700 Kitchen Worktop Jig Inc Join Bolts 12.7 C153 Cutter Pair of Clamps
Your Rating