Subscribe
TO OUR NEWSLETTER
Subsribe to our email newsletter today to receive product news and special offers!
Sika Multi Stick Waterproof Grab Adhesive 100kg Bonding Strength White 350ml
Stock Code:
SKMULTISWE
View All: Parcel Fillers - Items £10 or Under
£6.90
£5.75
In stock - FREE STANDARD DELIVERY to most UK postcodes - Next Day Delivery Available
Description
Sika Multi-Stick is an exciting new grab adhesive based on new SPUR technology (Silyl-terminated PUR technology).
This superior adhesive has the ability to bond virtually anything to everything in both wet and dry conditions, and even underwater or in the rain. With incredible initial grab, high bonding strength, and almost limitless applications and other benefits, no tradesman should be without a tube of this next generation adhesive. Think of any bonding application and it is virtually certain Sika Multi-Stick will handle it with ease. Sika Multi-Stick is capable of bonding to almost all materials, porous and non-porous, such as GLASS, MARBLE, GRANITE, MIRRORS, BRICKS, STONE, PLASTERBOARD, CONCRETE, ALL METALS, ALL HARD PLASTIC, CERAMICS, FIBREGLASS, TIMBER & MUCH, MUCH MORE, including applications underwater.
Benefits
Primerless adhesion to all common building substrates, porous and non-porous.
Internal and External use.
Fast curing.
Solvent free.
Virtually odourless.
Low dirt pick up.
Excellent break off and tooling.
Waterproof.
Weather resistant.
UV resistant.
Chemical resistant.
Service temperature resistance (-50oC to +100oC).
Suitable for use with glass, lead, polycarbonate, and acrylic sheets.
Areas For Use
As a high quality nail replacement adhesive, even to damp surfaces.
Bonding mirrors to most common substrates.
Jointing cladding panels.
Bonding difficult materials such as specialised polymer systems, metals and fibreglass
Any application requiring high performance, durable bonding.
Applications where resistance to chemical spillage is required (garage forecourts etc.)
Limitations
Use on overhead applications Always use in conjunction with mechanical fixings.
Use in conjunction with mechanical fixings for glass block fitting or large mirrors (>0.5m2 total area)
For heavy items, provide temporary support until adhesive has dried.
In areas of high UV; some darkening/discolouration may occur. This does not affect the performance.
Overpaintability: check compatibility with specific paint first before over painting large areas.
Do not use on polythene safety backed mirrors, polypropylene or Teflon.
Do not use on surfaces that bleed oils or plasticizers
It is the user s responsibility to determine suitability for use. If in doubt, please contact Technical Services Department for advice.
Not for use as part of a glazing system.
Not for use in aquarium manufacture.
Not for use in conjunction with bitumen, or asphalt.
Yellowing can occur in the dark.
Surface Preparation
The surfaces to be must be clean, dry and free from dust, grease and other contaminants.
Improve adhesion by wiping surface with a suitable proprietary cleaner. Priming is generally not required, although we always advise testing small areas prior to use.
Application
Cut the tip of the cartridge taking care not to damage the thread. Fix nozzle, cut aperture to required width and apply with a standard sealant gun.
Surfaces must be sound, clean, dry and free from dust, grease, loose material etc.
Prime dusty surfaces with SikaBond PVA+ diluted 1:4 with water and allow to dry.
Apply using a standard sealant gun, cut tip of cartridge, apply nozzle and cut an opening to suite the required bead size.
For bonding heavy items (Plasterboard/worktops/wall panels etc) apply adhesive all the way around the edge of the item (30-50mm from edge) and cover back with beads of adhesive at 300mm intervals. Alternatively, apply adhesive direct to battens and press into place.
NOTE. With heavy items, always provide temporary support until the adhesive dries.
For bonding lightweight items (covings, dado rails, skirting etc) apply adhesive to back of item in one or two continuous beads and press immediately into place.
Where gap filling is required, mark the areas where there is a large gap and apply a thicker bead to these areas.
In all cases, clean up excess adhesive immediately with a cloth/white spirits
This superior adhesive has the ability to bond virtually anything to everything in both wet and dry conditions, and even underwater or in the rain. With incredible initial grab, high bonding strength, and almost limitless applications and other benefits, no tradesman should be without a tube of this next generation adhesive. Think of any bonding application and it is virtually certain Sika Multi-Stick will handle it with ease. Sika Multi-Stick is capable of bonding to almost all materials, porous and non-porous, such as GLASS, MARBLE, GRANITE, MIRRORS, BRICKS, STONE, PLASTERBOARD, CONCRETE, ALL METALS, ALL HARD PLASTIC, CERAMICS, FIBREGLASS, TIMBER & MUCH, MUCH MORE, including applications underwater.
Benefits
Primerless adhesion to all common building substrates, porous and non-porous.
Internal and External use.
Fast curing.
Solvent free.
Virtually odourless.
Low dirt pick up.
Excellent break off and tooling.
Waterproof.
Weather resistant.
UV resistant.
Chemical resistant.
Service temperature resistance (-50oC to +100oC).
Suitable for use with glass, lead, polycarbonate, and acrylic sheets.
Areas For Use
As a high quality nail replacement adhesive, even to damp surfaces.
Bonding mirrors to most common substrates.
Jointing cladding panels.
Bonding difficult materials such as specialised polymer systems, metals and fibreglass
Any application requiring high performance, durable bonding.
Applications where resistance to chemical spillage is required (garage forecourts etc.)
Limitations
Use on overhead applications Always use in conjunction with mechanical fixings.
Use in conjunction with mechanical fixings for glass block fitting or large mirrors (>0.5m2 total area)
For heavy items, provide temporary support until adhesive has dried.
In areas of high UV; some darkening/discolouration may occur. This does not affect the performance.
Overpaintability: check compatibility with specific paint first before over painting large areas.
Do not use on polythene safety backed mirrors, polypropylene or Teflon.
Do not use on surfaces that bleed oils or plasticizers
It is the user s responsibility to determine suitability for use. If in doubt, please contact Technical Services Department for advice.
Not for use as part of a glazing system.
Not for use in aquarium manufacture.
Not for use in conjunction with bitumen, or asphalt.
Yellowing can occur in the dark.
Surface Preparation
The surfaces to be must be clean, dry and free from dust, grease and other contaminants.
Improve adhesion by wiping surface with a suitable proprietary cleaner. Priming is generally not required, although we always advise testing small areas prior to use.
Application
Cut the tip of the cartridge taking care not to damage the thread. Fix nozzle, cut aperture to required width and apply with a standard sealant gun.
Surfaces must be sound, clean, dry and free from dust, grease, loose material etc.
Prime dusty surfaces with SikaBond PVA+ diluted 1:4 with water and allow to dry.
Apply using a standard sealant gun, cut tip of cartridge, apply nozzle and cut an opening to suite the required bead size.
For bonding heavy items (Plasterboard/worktops/wall panels etc) apply adhesive all the way around the edge of the item (30-50mm from edge) and cover back with beads of adhesive at 300mm intervals. Alternatively, apply adhesive direct to battens and press into place.
NOTE. With heavy items, always provide temporary support until the adhesive dries.
For bonding lightweight items (covings, dado rails, skirting etc) apply adhesive to back of item in one or two continuous beads and press immediately into place.
Where gap filling is required, mark the areas where there is a large gap and apply a thicker bead to these areas.
In all cases, clean up excess adhesive immediately with a cloth/white spirits
Specifications
Specification of the Everbuil SKMULTISWE
Colour: White
Skinning time: 20 40 mins
Cure time: 1-2mm per 24 hours
Hardness Shore A: 50-60
Service temperature resistance: -50 C to + 100 C
Application temperature resistance: +5 C to + 35 C
Specific gravity: 1.7 g/cm3
Cleaning: Uncured sealant white spirit.
Sagging (ISO7390): Nil
Colour: White
Skinning time: 20 40 mins
Cure time: 1-2mm per 24 hours
Hardness Shore A: 50-60
Service temperature resistance: -50 C to + 100 C
Application temperature resistance: +5 C to + 35 C
Specific gravity: 1.7 g/cm3
Cleaning: Uncured sealant white spirit.
Sagging (ISO7390): Nil
EAN: 5055492701725
In an ever more complex world we understand that product accreditations, certification and test are increasingly important, particularly in the construction sector.
From an ISO 9001 quality system accredited by the British Standards Institute to CE approved products, comprehensive fire, acoustic and thermal tests through to the environmental standard ISO 14001, you have the assurance of dealing with a company that is setting industry leading standards in product testing and compliances.
Buyaparcel offer delivery throughout the United Kingdom, including Northern Ireland, Scottish Highlands and other Islands of the UK. In addition we can now also deliver through Europe.
UK Delivery Prices
Standard delivery is free with no minimum order charge to most mainland UK delivery addresses. Surcharges can apply to certain postcodes depending on the service type. For full details visit our Delivery Guide.
In additional to our standard service we also offer some premium delivery services if you need your item quickly
£0.00 - Standard UK Delivery (2-3 Days Approx)
£2.99 - Next Day UK Delivery (Orders placed before 3.00pm Monday - Friday)
*orders placed after 3.00pm Friday will still be delivered Monday if ordered before 11am Saturday Morning
£8.99 - Saturday Delivery (Orders placed before 3.00pm Friday)
£36.00 - Pallet Delivery (2-3 Days Approx - selected products only)
Alternatively if you view your parcel once items have been added and enter your postcode you will see what derlivery services are available.
International Delivery Prices
In addition we now deliver through Europe on a 48 Hour Delivery Service as Standard
Zone 1 – £9.99
Belgium, Germany, Luxembourg, France, Netherlands, Rep Ireland.
Zone 2- £14.99
Austria, Denmark, Czech Republic, Poland, Lithuania, Hungary.
Zone 3 – £19.99
Estonia, Spain, Sweden, Italy, Portugal, Latvia.
Zone 4 – £29.99
Bulgaria, Finland, Romania.
Zone 5 – £49.99
Bosnia, Croatia, Switzerland.
Zone 6 – £59.99
Norway, Serbia, Iceland.
Is My Item Available for Next Day Delivery?
If your item is stocked in our immediate picking location it will available for you to choose a next day delivery. This will be highlighted by a green tick and a 1 day dispatch time on the item information. 
You will have the option to choose this service if you are purchasing your item for delivery to mainland UK.
What courier will my item be delivered with?
If your item is being delivered in the UK or Ireland, it will be delivered by UK Mail/DHL, Hermes or Royal Mail, with the exception of pallet items.
If you are an international customer, your goods will initially be sent via UK Mail/DHL, and then exported to either Eurodis or DHL. The appropriate tracking can be provided when necessary.
Details of each courier service we offer are detailed in our Delivery Guide.
Is My Item Available for Click and Collect at your Lowestoft Store?
If your item is showing "In Stock" then you will be able to do a Same Day Click and Collect order from our Lowestoft Pinbush Road. Our cut off for same day collections is 3.00pm Mon-Fri / 11.00am Saturday. After that the product will be ready the next day for collection. After the cut off you are welcome to do a Call and Collect order by phoning our trade counter on 01502 507666. If your item is in stock you will still be able to do a same day collection and payment.
Our store is open Monday to Friday 8.00am - 5.00pm and Saturday 8.00am - 12.00pm so any orders placed the remainder of the weekend will be available for collection on Monday. Weekdays any orders placed up to midnight will be available for collection the following day. This excludes bank holidays.
Please wait for email confirmation your order is ready for collection from our store before you travel.
On collection we will require you to show a copy of your order confirmation, electronic or printed. In addition to this please bring photo ID which must be your passport or photo driving licence, matching the name on the PayPal/Amazon/Credit or Debit card used.
Collection option only available to NR and IP Postcodes
We've simplified our returns process! We now offer a no-questions-asked, free returns service within the first 30 days (subject to T&Cs).
You can find our returns information in our Terms and Help page
Spread the cost of your Buyaparcel purchase with Paypal Credit - Get 0% finance over 4 months! The perfect way to spread the cost of any purchases of £99 (inc vat) or more
Applying is that simple. If approved and you accept, you'll have a credit limit added to your PayPal account ready to use immediately. Plus, you'll automatically get 0% interest for 4 months on all your purchases of £99 or more.*
How to apply for Paypal Credit with Buyaparcel?
You have 2 ways to purchase from us with the option us using Paypal Credit.
1 - From the product page you can use Paypal Express Checkout which will take you straight to your Paypal account where you can login to complete payment or apply for Paypal Credit.
2 - If you add your product to your parcel and click "Proceed to Checkout" you will then go to our payment page. Select "Paypal Express Checkout" from the payment methods available and click "Place Order".
Once you are in your Paypal account choose PayPal Credit from the payment options.
If this is the first time you have used PayPal Credit, you will be asked to complete a short application form to apply for PayPal credit.
More Information on Paypal Credit
Write Your Own Review