Subscribe
TO OUR NEWSLETTER
Subsribe to our email newsletter today to receive product news and special offers!
MagnaClean Professional Pro2 Boiler Filter & Adey MC1+ MC3+ Chemical Pack
Stock Code:
MAGNA2PROCHEM
View All: Boilers & Accessories
View All Adey Products
£141.90
£118.25
Out of Stock - This Product is Currently Unavailable
Description
Pack Contains:
MagnaClean Professional2 Magnetic Boiler Filter
Adey MC1+ Inhibitor 500ml
Adey MC3+ Cleaner 500ml
MagnaClean Professional2 Filter is a proven, high efficiency, full-flow magnetic filter designed to tackle all central heating systems removing virtually 100% of the suspended black iron oxide. This professional filter sets an industry standard for plumbing and heating engineers when it comes to protecting and maintaining both new and existing heating systems.
Homeowner Benefits
6%* annual saving on heating bills (*For a typical three-bedroom property based on independent research)
Immediate ongoing central heating system protection
Extends the life of the central heating system
Reduced carbon emissions
Correctly sized filter for the central heating system
10 year warranty
The MC1+ is a new advanced central heating system protector from Adey Solutions. It prevents scale and corrosion within your central heating system and is suitable to be used with all open vented and sealed systems. The MC1+ has exceptional results when used with the Adey Magna Clean and offers long term protection.
The MC3+ is a new advanced central heating system cleaning formula from Adey Solutions. It is designed to remove and debris or sludge from the system that shouldn't be there. The MC3+ can be used in all heating systems whether your system is sealed or open vented. Using it with the Adey MagnaCleanse brings out exceptional results. It is also possible to perform a full system cleanse in just two hours.
MagnaClean Professional2 Magnetic Boiler Filter
Adey MC1+ Inhibitor 500ml
Adey MC3+ Cleaner 500ml
MagnaClean Professional2 Filter is a proven, high efficiency, full-flow magnetic filter designed to tackle all central heating systems removing virtually 100% of the suspended black iron oxide. This professional filter sets an industry standard for plumbing and heating engineers when it comes to protecting and maintaining both new and existing heating systems.
Homeowner Benefits
6%* annual saving on heating bills (*For a typical three-bedroom property based on independent research)
Immediate ongoing central heating system protection
Extends the life of the central heating system
Reduced carbon emissions
Correctly sized filter for the central heating system
10 year warranty
The MC1+ is a new advanced central heating system protector from Adey Solutions. It prevents scale and corrosion within your central heating system and is suitable to be used with all open vented and sealed systems. The MC1+ has exceptional results when used with the Adey Magna Clean and offers long term protection.
The MC3+ is a new advanced central heating system cleaning formula from Adey Solutions. It is designed to remove and debris or sludge from the system that shouldn't be there. The MC3+ can be used in all heating systems whether your system is sealed or open vented. Using it with the Adey MagnaCleanse brings out exceptional results. It is also possible to perform a full system cleanse in just two hours.
Specifications
Pro2 Filter
Technical Specifications
Canister and lid
Material: Glass reinforced nylon
Fluid capacity: 250 ml
Inlet diameter: 22 mm at valve
Outlet diameter: 22 mm at valve
Thread: Pressure thread
Flow configuration: Bi-directional
Main lid seal: EPDM
Valve to canister: EPDM
Magnet
Housing: Stainless steel
Length: 97.5 mm
Diameter: 19 mm
Bleed valve
Body material: Nickel plated brass
Screw: Nickel plated brass
Thread interface: M6
Seals: EPDM
Drain port
Drain plug material: Nickel plated brass
Drain plug thread: M8
Seals: EPDM
Triple seal valves
Body material: Nickel plated brass
Seals material: Long life PTFE ball seals
O ring material: EPDM 70 seals x3
Valve inlet/outlet: 22 mm
Servicing Clearance
Air vent (top): 50 mm
Drain Plug (bottom): 50 mm
MC1+
500ml of MC1+ treats 125 litres or 15 single panel radiators. To introduce MC1+ into the system we recommend using the MagnaClean canister to dose the system. Alternatively dose via a radiator or the F&E tank. MC1+ levels should be checked regularly during annual system service, or following any system maintenance requiring full or partial drain-down. Do not use in single feed indirect cylinders.
MC3+
500ml of MC3+ treats 125 litres or 15 single panel radiators. Introduce MC3+ to the system via the filling loop or radiator using a suitable injector, or via a MagnaClean filter. For open vented systems MC3+ can be added via the F&E tank, remembering to remove sufficient water via the drain-point to ensure MC3+ enters the system circuit.
Clean system as recommended in BS7593 using ADEY MagnaCleanse and MC3+. For heavily sludged systems, ADEY MC5 RapidFlush System Cleaner is recommended. Cleanse, drain and flush thoroughly until the water runs clear. Refill the system and add the correct dosage of MC1 for the optimum protection against the build-up of corrosion and limescale.
Technical Specifications
Canister and lid
Material: Glass reinforced nylon
Fluid capacity: 250 ml
Inlet diameter: 22 mm at valve
Outlet diameter: 22 mm at valve
Thread: Pressure thread
Flow configuration: Bi-directional
Main lid seal: EPDM
Valve to canister: EPDM
Magnet
Housing: Stainless steel
Length: 97.5 mm
Diameter: 19 mm
Bleed valve
Body material: Nickel plated brass
Screw: Nickel plated brass
Thread interface: M6
Seals: EPDM
Drain port
Drain plug material: Nickel plated brass
Drain plug thread: M8
Seals: EPDM
Triple seal valves
Body material: Nickel plated brass
Seals material: Long life PTFE ball seals
O ring material: EPDM 70 seals x3
Valve inlet/outlet: 22 mm
Servicing Clearance
Air vent (top): 50 mm
Drain Plug (bottom): 50 mm
MC1+
500ml of MC1+ treats 125 litres or 15 single panel radiators. To introduce MC1+ into the system we recommend using the MagnaClean canister to dose the system. Alternatively dose via a radiator or the F&E tank. MC1+ levels should be checked regularly during annual system service, or following any system maintenance requiring full or partial drain-down. Do not use in single feed indirect cylinders.
MC3+
500ml of MC3+ treats 125 litres or 15 single panel radiators. Introduce MC3+ to the system via the filling loop or radiator using a suitable injector, or via a MagnaClean filter. For open vented systems MC3+ can be added via the F&E tank, remembering to remove sufficient water via the drain-point to ensure MC3+ enters the system circuit.
Clean system as recommended in BS7593 using ADEY MagnaCleanse and MC3+. For heavily sludged systems, ADEY MC5 RapidFlush System Cleaner is recommended. Cleanse, drain and flush thoroughly until the water runs clear. Refill the system and add the correct dosage of MC1 for the optimum protection against the build-up of corrosion and limescale.
EAN: 5060106370198
Adey's confidence in the quality and performance of their products is demonstrated by a two-year warranty.
For a period of two years from the date of installation, the warranty, once registered, covers you against defective materials or manufacture. If, in the opinion of ADEY, the product fails to meet published specifications due to a defect in materials or manufacture, they will repair or replace the defective unit free of charge.
For further information, call 01242 546717 or visit their website.
Buyaparcel offer delivery throughout the United Kingdom, including Northern Ireland, Scottish Highlands and other Islands of the UK. In addition we can now also deliver through Europe.
UK Delivery Prices
Standard delivery is free with no minimum order charge to most mainland UK delivery addresses. Surcharges can apply to certain postcodes depending on the service type. For full details visit our Delivery Guide.
In additional to our standard service we also offer some premium delivery services if you need your item quickly
£0.00 - Standard UK Delivery (2-3 Days Approx)
£2.99 - Next Day UK Delivery (Orders placed before 3.00pm Monday - Friday)
*orders placed after 3.00pm Friday will still be delivered Monday if ordered before 11am Saturday Morning
£8.99 - Saturday Delivery (Orders placed before 3.00pm Friday)
£36.00 - Pallet Delivery (2-3 Days Approx - selected products only)
Alternatively if you view your parcel once items have been added and enter your postcode you will see what derlivery services are available.
International Delivery Prices
In addition we now de