Subscribe
TO OUR NEWSLETTER
Subsribe to our email newsletter today to receive update on the
latest news, tutorials and special offers!
Everbuild 404 Fungicidal Path Drive Wash Algae Remover and 402 Water Seal 5L
Stock Code:
FUN5_WAT5
Everbuild 404 Fungicidal Path Drive Wash Algae Remover and 402 Water Seal 5L
Stock Code:
FUN5_WAT5
View All: Cleaning Fluids & Dispensers
View All Everbuild Sika Products
View All: Buyaparcel Summer Essentials
£27.95
Excl. VAT
£23.29
Excl. VAT
Out of stock - This Product is Currently Unavailable
Description
Specification
Delivery
Returns
Finance Options
Reviews
404 Fungicidal Wash is a powerful, fungicidal wash for the removal of lichens, fungi and algae on all mineral surfaces such as walls, paths, roofs, drives etc. It also leaves a residual surface to help prevent further infestation.
USES
Kills mould and fungal growth caused by damp on internal and external floors and walls.
Kills mould and fungal growth on roofs prior to coating with bituminous coatings.
Removes algae, lichen, green slime and fungal growth from patios/drives.
CHARACTERISTICS / ADVANTAGES
Internal and external use.
Fast acting.
Leaves a residual surface to prevent future infestation.
Powerful formula.
APPLICATION INSTRUCTIONS
Always read label before use and wear suitable protective equipment.
Supplied ready to use. Do not dilute.
Remove all surface debris and growth from the area to be treated. Apply by brush or spray at a rate of 1 litre per 5 - 10m2 depending on porosity of surface.
Leave solution for 20 minutes.
Finally, wash down the area with water. Repeat process for badly infested areas. Take care not to allow residues to run directly into fresh watercourses.
LIMITATIONS
Ready to use - do not dilute
For use only as specified as a surface biocide.
USES
Kills mould and fungal growth caused by damp on internal and external floors and walls.
Kills mould and fungal growth on roofs prior to coating with bituminous coatings.
Removes algae, lichen, green slime and fungal growth from patios/drives.
CHARACTERISTICS / ADVANTAGES
Internal and external use.
Fast acting.
Leaves a residual surface to prevent future infestation.
Powerful formula.
APPLICATION INSTRUCTIONS
Always read label before use and wear suitable protective equipment.
Supplied ready to use. Do not dilute.
Remove all surface debris and growth from the area to be treated. Apply by brush or spray at a rate of 1 litre per 5 - 10m2 depending on porosity of surface.
Leave solution for 20 minutes.
Finally, wash down the area with water. Repeat process for badly infested areas. Take care not to allow residues to run directly into fresh watercourses.
LIMITATIONS
Ready to use - do not dilute
For use only as specified as a surface biocide.
Waterseal is a high-performance transparent water repellent specially formulated to prevent water penetration on all mineral substrates such as brick, stone, concrete, pebbledash and rendering.
USES
As an effective water repellent on:
Brick
Stone
Render
Concrete
Pebble dashing
CHARACTERISTICS / ADVANTAGES
Improved durability and beading effect.
Solvent free formula.
Non-flammable.
May be applied by conventional garden spray.
May be applied to damp surfaces.
Active Components Emulsified polysiloxane
(silicone) resin in water
Coverage 5 – 8 m² / litre depending
on porosity and nature of
surfaces being treated.
APPLICATION INSTRUCTIONS
SUBSTRATE QUALITY / PRE-TREATMENT
All surfaces must be clean and sound, free from dirt,
mould, algae, grease and other contamination. Surfaces may be damp not wet. Carry out surface repairs
and fill cracks before application
APPLICATION
Shake well before use. EVERBUILD® 402 WaterSeal
may be applied to dry or damp (not wet) surfaces. Apply by low pressure (garden) spray, brush or roller.
NOTE: THIS PRODUCT WILL DRY CLEAR.
On vertical surfaces, saturate the wall working from
the bottom up, ensuring the entire surface is covered.
On horizontal surfaces, flood the entire area then after
10 minutes, spread out with a soft brush, roller or mop
to ensure the entire area is covered.
Two coats are normally required; the second coat being applied within 1 hour – as soon as the first coat has
soaked in and whilst the surface is still wet. Clean
brushes, rollers and spray equipment with warm water IMMEDIATELY after use.
LIMITATIONS
Do not apply below 10oC.
Do not apply when raining or when rain is imminent.
Do not use on painted surfaces.
Allowing the first coat to dry may prevent penetration of the second coat. Always apply second coat
within 1 hour, or before first coat is dry.
Do not use on wood, plastic or rubber.
Do not use in fishponds.
Do not use detergents to clean the substrate prior to
application of this product - this will dramatically reduce the beading effect.
Note: The surface to be treated may darken after the
first application. Always test a small area first PRIOR to
coating the whole surface.
USES
As an effective water repellent on:
Brick
Stone
Render
Concrete
Pebble dashing
CHARACTERISTICS / ADVANTAGES
Improved durability and beading effect.
Solvent free formula.
Non-flammable.
May be applied by conventional garden spray.
May be applied to damp surfaces.
Active Components Emulsified polysiloxane
(silicone) resin in water
Coverage 5 – 8 m² / litre depending
on porosity and nature of
surfaces being treated.
APPLICATION INSTRUCTIONS
SUBSTRATE QUALITY / PRE-TREATMENT
All surfaces must be clean and sound, free from dirt,
mould, algae, grease and other contamination. Surfaces may be damp not wet. Carry out surface repairs
and fill cracks before application
APPLICATION
Shake well before use. EVERBUILD® 402 WaterSeal
may be applied to dry or damp (not wet) surfaces. Apply by low pressure (garden) spray, brush or roller.
NOTE: THIS PRODUCT WILL DRY CLEAR.
On vertical surfaces, saturate the wall working from
the bottom up, ensuring the entire surface is covered.
On horizontal surfaces, flood the entire area then after
10 minutes, spread out with a soft brush, roller or mop
to ensure the entire area is covered.
Two coats are normally required; the second coat being applied within 1 hour – as soon as the first coat has
soaked in and whilst the surface is still wet. Clean
brushes, rollers and spray equipment with warm water IMMEDIATELY after use.
LIMITATIONS
Do not apply below 10oC.
Do not apply when raining or when rain is imminent.
Do not use on painted surfaces.
Allowing the first coat to dry may prevent penetration of the second coat. Always apply second coat
within 1 hour, or before first coat is dry.
Do not use on wood, plastic or rubber.
Do not use in fishponds.
Do not use detergents to clean the substrate prior to
application of this product - this will dramatically reduce the beading effect.
Note: The surface to be treated may darken after the
first application. Always test a small area first PRIOR to
coating the whole surface.
PRODUCT INFORMATION 404
Packaging - 5ltr plastic containers
Appearance - Colour Clear solution
Shelf Life 24 months from date of manufacture when stored according to manufacturers
instructions.
Storage Conditions Store at moderate temperatures in original containers.
PROTECT FROM FROST.
Density 1.0 g/cm at 20 C
APPLICATION INFORMATION
Yield 1Ltr will cover approximately 5-10m of surface depending on nature of surface.
Packaging - 5ltr plastic containers
Appearance - Colour Clear solution
Shelf Life 24 months from date of manufacture when stored according to manufacturers
instructions.
Storage Conditions Store at moderate temperatures in original containers.
PROTECT FROM FROST.
Density 1.0 g/cm at 20 C
APPLICATION INFORMATION
Yield 1Ltr will cover approximately 5-10m of surface depending on nature of surface.
PRODUCT INFORMATION 402
Packaging 5L Jerry Can
Appearance / Colour Milky White – Dries Clear
Shelf Life 12 months from date of manufacture.
Packaging 5L Jerry Can
Appearance / Colour Milky White – Dries Clear
Shelf Life 12 months from date of manufacture.
Note that the product towards the end of this period may separate into white and clear layers.
Simply shake
well before applying to reconstitute.
well before applying to reconstitute.
This is an aesthetic and will not affect the performance of the product.
Storage Conditions Store in dry conditions between 5 and 30°C, protect from frost.
Storage Conditions Store in dry conditions between 5 and 30°C, protect from frost.
EAN: 5055995553906
Buyaparcel offer delivery throughout the United Kingdom, including Northern Ireland, Scottish Highlands and other Islands of the UK. We do not currently ship overseas.
UK Delivery Prices
Standard delivery is free with no minimum order charge to most mainland UK delivery addresses. Surcharges can apply to certain postcodes depending on the service type. For full details visit our Delivery Guide.
In additional to our standard service we also offer some premium delivery services if you need your item quickly
£0.00 - Standard UK Delivery (2-3 Days Approx)
£2.99 - Next Day UK Delivery (Orders placed before 3.00pm Monday - Friday)
*orders placed after 3.00pm Friday will still be delivered Monday if ordered before 11am Saturday Morning
£8.99 - Saturday Delivery (Orders placed before 3.00pm Friday)
£36.00 - Pallet Delivery (2-3 Days Approx - selected products only)
Alternatively if you view your parcel once items have been added and enter your postcode you will see what derlivery services are available.
Is My Item Available for Next Day Delivery?
If your item is stocked in our immediate picking location it will available for you to choose a next day delivery. This will be highlighted by a green tick and a 1 day dispatch time on the item information. 
You will have the option to choose this service if you are purchasing your item for delivery to mainland UK.
What courier will my item be delivered with?
If your item is being delivered in the UK or Ireland, it will be delivered by DHL eCopmmerce UK, Evri or Royal Mail, with the exception of pallet items.
Details of each courier service we offer are detailed in our Delivery Guide.
Is My Item Available for Click and Collect at your Lowestoft Store?
If your item is showing "In Stock" then you will be able to do a Same Day Click and Collect order from our Lowestoft Pinbush Road. Our cut off for same day collections is 3.00pm Mon-Fri / 11.00am Saturday. After that the product will be ready the next day for collection. After the cut off you are welcome to do a Call and Collect order by phoning our trade counter on 01502 507666. If your item is in stock you will still be able to do a same day collection and payment.
Our store is open Monday to Friday 8.00am - 5.00pm and Saturday 8.00am - 12.00pm so any orders placed the remainder of the weekend will be available for collection on Monday. Weekdays any orders placed up to midnight will be available for collection the following day. This excludes bank holidays.
Please wait for email confirmation your order is ready for collection from our store before you travel.
On collection we will require you to show a copy of your order confirmation, electronic or printed. In addition to this please bring photo ID which must be your passport or photo driving licence, matching the name on the PayPal/Amazon/Credit or Debit card used.
Collection option only available to NR and IP Postcodes
We've simplified our returns process! We now offer a no-questions-asked, free returns service within the first 30 days (subject to T&Cs).
You can find our returns information in our Terms and Help page
Spread the cost of your Buyaparcel purchase with Paypal Credit - Get 0% finance over 4 months! The perfect way to spread the cost of any purchases of £99 (inc vat) or more
Applying is that simple. If approved and you accept, you'll have a credit limit added to your PayPal account ready to use immediately. Plus, you'll automatically get 0% interest for 4 months on all your purchases of £99 or more.*
How to apply for Paypal Credit with Buyaparcel?
You have 2 ways to purchase from us with the option us using Paypal Credit.
1 - From the product page you can use Paypal Express Checkout which will take you straight to your Paypal account where you can login to complete payment or apply for Paypal Credit.
2 - If you add your product to your parcel and click "Proceed to Checkout" you will then go to our payment page. Select "Paypal Express Checkout" from the payment methods available and click "Place Order".
Once you are in your Paypal account choose PayPal Credit from the payment options.
If this is the first time you have used PayPal Credit, you will be asked to complete a short application form to apply for PayPal credit.
More Information on Paypal Credit
Write Your Own Review
Description
404 Fungicidal Wash is a powerful, fungicidal wash for the removal of lichens, fungi and algae on all mineral surfaces such as walls, paths, roofs, drives etc. It also leaves a residual surface to help prevent further infestation.
USES
Kills mould and fungal growth caused by damp on internal and external floors and walls.
Kills mould and fungal growth on roofs prior to coating with bituminous coatings.
Removes algae, lichen, green slime and fungal growth from patios/drives.
CHARACTERISTICS / ADVANTAGES
Internal and external use.
Fast acting.
Leaves a residual surface to prevent future infestation.
Powerful formula.
APPLICATION INSTRUCTIONS
Always read label before use and wear suitable protective equipment.
Supplied ready to use. Do not dilute.
Remove all surface debris and growth from the area to be treated. Apply by brush or spray at a rate of 1 litre per 5 - 10m2 depending on porosity of surface.
Leave solution for 20 minutes.
Finally, wash down the area with water. Repeat process for badly infested areas. Take care not to allow residues to run directly into fresh watercourses.
LIMITATIONS
Ready to use - do not dilute
For use only as specified as a surface biocide.
USES
Kills mould and fungal growth caused by damp on internal and external floors and walls.
Kills mould and fungal growth on roofs prior to coating with bituminous coatings.
Removes algae, lichen, green slime and fungal growth from patios/drives.
CHARACTERISTICS / ADVANTAGES
Internal and external use.
Fast acting.
Leaves a residual surface to prevent future infestation.
Powerful formula.
APPLICATION INSTRUCTIONS
Always read label before use and wear suitable protective equipment.
Supplied ready to use. Do not dilute.
Remove all surface debris and growth from the area to be treated. Apply by brush or spray at a rate of 1 litre per 5 - 10m2 depending on porosity of surface.
Leave solution for 20 minutes.
Finally, wash down the area with water. Repeat process for badly infested areas. Take care not to allow residues to run directly into fresh watercourses.
LIMITATIONS
Ready to use - do not dilute
For use only as specified as a surface biocide.
Waterseal is a high-performance transparent water repellent specially formulated to prevent water penetration on all mineral substrates such as brick, stone, concrete, pebbledash and rendering.
USES
As an effective water repellent on:
Brick
Stone
Render
Concrete
Pebble dashing
CHARACTERISTICS / ADVANTAGES
Improved durability and beading effect.
Solvent free formula.
Non-flammable.
May be applied by conventional garden spray.
May be applied to damp surfaces.
Active Components Emulsified polysiloxane
(silicone) resin in water
Coverage 5 – 8 m² / litre depending
on porosity and nature of
surfaces being treated.
APPLICATION INSTRUCTIONS
SUBSTRATE QUALITY / PRE-TREATMENT
All surfaces must be clean and sound, free from dirt,
mould, algae, grease and other contamination. Surfaces may be damp not wet. Carry out surface repairs
and fill cracks before application
APPLICATION
Shake well before use. EVERBUILD® 402 WaterSeal
may be applied to dry or damp (not wet) surfaces. Apply by low pressure (garden) spray, brush or roller.
NOTE: THIS PRODUCT WILL DRY CLEAR.
On vertical surfaces, saturate the wall working from
the bottom up, ensuring the entire surface is covered.
On horizontal surfaces, flood the entire area then after
10 minutes, spread out with a soft brush, roller or mop
to ensure the entire area is covered.
Two coats are normally required; the second coat being applied within 1 hour – as soon as the first coat has
soaked in and whilst the surface is still wet. Clean
brushes, rollers and spray equipment with warm water IMMEDIATELY after use.
LIMITATIONS
Do not apply below 10oC.
Do not apply when raining or when rain is imminent.
Do not use on painted surfaces.
Allowing the first coat to dry may prevent penetration of the second coat. Always apply second coat
within 1 hour, or before first coat is dry.
Do not use on wood, plastic or rubber.
Do not use in fishponds.
Do not use detergents to clean the substrate prior to
application of this product - this will dramatically reduce the beading effect.
Note: The surface to be treated may darken after the
first application. Always test a small area first PRIOR to
coating the whole surface.
USES
As an effective water repellent on:
Brick
Stone
Render
Concrete
Pebble dashing
CHARACTERISTICS / ADVANTAGES
Improved durability and beading effect.
Solvent free formula.
Non-flammable.
May be applied by conventional garden spray.
May be applied to damp surfaces.
Active Components Emulsified polysiloxane
(silicone) resin in water
Coverage 5 – 8 m² / litre depending
on porosity and nature of
surfaces being treated.
APPLICATION INSTRUCTIONS
SUBSTRATE QUALITY / PRE-TREATMENT
All surfaces must be clean and sound, free from dirt,
mould, algae, grease and other contamination. Surfaces may be damp not wet. Carry out surface repairs
and fill cracks before application
APPLICATION
Shake well before use. EVERBUILD® 402 WaterSeal
may be applied to dry or damp (not wet) surfaces. Apply by low pressure (garden) spray, brush or roller.
NOTE: THIS PRODUCT WILL DRY CLEAR.
On vertical surfaces, saturate the wall working from
the bottom up, ensuring the entire surface is covered.
On horizontal surfaces, flood the entire area then after
10 minutes, spread out with a soft brush, roller or mop
to ensure the entire area is covered.
Two coats are normally required; the second coat being applied within 1 hour – as soon as the first coat has
soaked in and whilst the surface is still wet. Clean
brushes, rollers and spray equipment with warm water IMMEDIATELY after use.
LIMITATIONS
Do not apply below 10oC.
Do not apply when raining or when rain is imminent.
Do not use on painted surfaces.
Allowing the first coat to dry may prevent penetration of the second coat. Always apply second coat
within 1 hour, or before first coat is dry.
Do not use on wood, plastic or rubber.
Do not use in fishponds.
Do not use detergents to clean the substrate prior to
application of this product - this will dramatically reduce the beading effect.
Note: The surface to be treated may darken after the
first application. Always test a small area first PRIOR to
coating the whole surface.
Specification
PRODUCT INFORMATION 404
Packaging - 5ltr plastic containers
Appearance - Colour Clear solution
Shelf Life 24 months from date of manufacture when stored according to manufacturers
instructions.
Storage Conditions Store at moderate temperatures in original containers.
PROTECT FROM FROST.
Density 1.0 g/cm at 20 C
APPLICATION INFORMATION
Yield 1Ltr will cover approximately 5-10m of surface depending on nature of surface.
Packaging - 5ltr plastic containers
Appearance - Colour Clear solution
Shelf Life 24 months from date of manufacture when stored according to manufacturers
instructions.
Storage Conditions Store at moderate temperatures in original containers.
PROTECT FROM FROST.
Density 1.0 g/cm at 20 C
APPLICATION INFORMATION
Yield 1Ltr will cover approximately 5-10m of surface depending on nature of surface.
PRODUCT INFORMATION 402
Packaging 5L Jerry Can
Appearance / Colour Milky White – Dries Clear
Shelf Life 12 months from date of manufacture.
Packaging 5L Jerry Can
Appearance / Colour Milky White – Dries Clear
Shelf Life 12 months from date of manufacture.
Note that the product towards the end of this period may separate into white and clear layers.
Simply shake
well before applying to reconstitute.
well before applying to reconstitute.
This is an aesthetic and will not affect the performance of the product.
Storage Conditions Store in dry conditions between 5 and 30°C, protect from frost.
Storage Conditions Store in dry conditions between 5 and 30°C, protect from frost.
EAN: 5055995553906
Returns
We've simplified our returns process! We now offer a no-questions-asked, free returns service within the first 30 days (subject to T&Cs).
You can find our returns information in our Terms and Help page
Finance Options
Spread the cost of your Buyaparcel purchase with Paypal Credit - Get 0% finance over 4 months! The perfect way to spread the cost of any purchases of £99 (inc vat) or more
Applying is that simple. If approved and you accept, you'll have a credit limit added to your PayPal account ready to use immediately. Plus, you'll automatically get 0% interest for 4 months on all your purchases of £99 or more.*
How to apply for Paypal Credit with Buyaparcel?
You have 2 ways to purchase from us with the option us using Paypal Credit.
1 - From the product page you can use Paypal Express Checkout which will take you straight to your Paypal account where you can login to complete payment or apply for Paypal Credit.
2 - If you add your product to your parcel and click "Proceed to Checkout" you will then go to our payment page. Select "Paypal Express Checkout" from the payment methods available and click "Place Order".
Once you are in your Paypal account choose PayPal Credit from the payment options.
If this is the first time you have used PayPal Credit, you will be asked to complete a short application form to apply for PayPal credit.
More Information on Paypal Credit
Reviews
Write Your Own Review
