CalMag can be fitted onto the hot or cold water lines. It comes with compression fittings as standard and does not require earth bonding. Once the unit has been installed you can sit back and relax as it will continue to work day and night without the need for regular maintenance.
Scale Cost Money - The build up of scale on heating surfaces can increase fuel costs substantially. The scale barrier is a poor conductor of heat so reduces the efficiency of heat transfer - costing valuable energy and money.
Scale increases Time & Effort - Build up of scale on shower heads, tiled surfaces, taps. basins etc. is difficult to remove - and also unsightl
Benefits
Economical to operate Water remains potable No maintenance Easy to install Competitive initial cost Stops hard scale forming No chemicals used
After Installation you should notice the following effects?
1. Any hard limescale that has formed around taps, sinks etc, will begin to soften with regular contact with treated water. This will make it much easier to clean.
2. Shower heads will be become descaled over time. Initially, showerheads may become blocked with loose limescale debris (often the case with electric showers). To solve this, simply remove the shower head and rinse out the debris.
3. After several months your hot water system will gradually become more efficient. Eventually you should be able to lower the water temperature and make considerable savings over the year.
Fitting - Compression External Diameter - 22 mm Internal Diameter (Bore) - 15mm Length - 190 mm (15mm) Maximum Flow Rate - 1.08 l/sec or 14 gpm Maximum Working Pressure - 12 bar (168 psi) Maximum Working Temperature - 100 Degre Full Metal Body Earth Bonding Required