Home > Tool Shop > Hardware and Consumables > Wipes and Cleaning

Everbuild Geo-fix Natural Stone Protector Patio Paving Sealer 5L 5 Litre Geofix

Everbuild Geo-fix Natural Stone Protector Patio Paving Sealer 5L 5 Litre Geofix
Everbuild Geo-fix Natural Stone Protector Patio Paving Sealer 5L 5 Litre Geofix
Everbuild Geo-fix Natural Stone Protector Patio Paving Sealer 5L 5 Litre Geofix
Stock Code GEOSTONE5

£23.75 Inc VAT

£19.79 Ex Vat

Everbuild
In Stock - available for next day delivery
Stock Checked:
Quantity
Loading Updating parcel...
Estimated UK Delivery Costs - Per Order
Standard Delivery £3.95
Next Day Delivery £5.95
UK Mail Logo

Medium Product

More Information
International Delivery Options Available

PRODUCT DESCRIPTION
Based on an advanced Fluoro-Resin formula, EVERBUILD®
Geo-Fix Stone Protector has been specially developed to provide highly effective long lasting protection on Natural Stone and Mineral Surfaces. Importantly, particularly when using on expensive high quality
Natural Stone, EVERBUILD® Geo-Fix Stone Protector is invisible and will not change the colour or appearance of the stone*.
EVERBUILD® Geo-Fix Stone Protector protects stone and paving from staining from most liquids including oil, petrol and water, prevents damage from water
penetration and erosion and also provides an excellent release coat for chewing gum, making it’s removal much easier.

USES
Can be used internally or externally on:
Natural stone
Masonry
Cementicious substrates
Grout Marble
Terracotta
Limestone
Slate
Brick and terrazzo
Floor tiles
Paving
Paths
Patios
Natural stone
Concrete
Block paving

CHARACTERISTICS / ADVANTAGES
▪ Solvent free formulation – non-flammable, low odour
▪ Fully compatible with Geo-Fix Paving Jointing Compound
▪ Can be used internally or externally
▪ Does not alter appearance of surface to which it is applied*
▪ Minimum Film Forming

APPLICATION INSTRUCTIONS
IMPORTANT: Geo-Fix Paving Compound must be allowed to dry/cure for a minimum of one week prior to application of EVERBUILD® Geo-Fix Stone Protector
Always test a small area for compatibility prior to full scale application.

SUBSTRATE QUALITY / PRE-TREATMENT
Ensure the surfaces to be treated are clean and free from any mould or fungal growth, waxes or coatings.
Surfaces may be damp, but have no standing water.
Mask off surrounding areas to prevent contamination

APPLICATION
Apply by brush or roller (from suitable container) or suitable low pressure spray, ensuring an even distribution.
Work well into surface for maximum penetration.
Do not leave surplus material on the surface. If necessary, wipe up excess with a damp cloth approximately 30 mins after application.
Ensure an even and thorough coverage, especially on textured stone where “ponding” of the product must be avoided.
Normally, only one coat is required, but for very porous stones, a second coat may be required, which must be applied
approximately 30 minutes after first coat (i.e. before first coat is fully dry).
Allow to dry for approximately 5-7 hours for foot traffic depending on air temperature.
Open to vehicular traffic 48-72 hours after application.
Do not apply below +5˚C or above +35°C.
Clean all tools etc with water before product dries.

MAINTENANCE / CLEANING
Areas treated with this product can be cleaned with warm water and detergent or Everbuild Patio Wizard.
If oil or petrol is spilled on paving, clean up spill before penetration is allowed to occur (this will happen in time).

LIMITATIONS
EVERBUILD® Geo-Fix Stone Protector will only work
where it can penetrate into the surface. Do not apply to non-porous surfaces.

Do not apply this product to painted surfaces or surfaces
that have previously been treated with stearate or silicone based water seals.

Do not apply this product if rain is imminent (within 6 hours at 20°C).
This product is fully compatible with Geo-Fix jointing compound, but will not make the paving compound
water repellent, only the surrounding paving.

EAN 5029347609801