Categories

  • No categories

A sample text widget

Etiam pulvinar consectetur dolor sed malesuada. Ut convallis euismod dolor nec pretium. Nunc ut tristique massa.

Nam sodales mi vitae dolor ullamcorper et vulputate enim accumsan. Morbi orci magna, tincidunt vitae molestie nec, molestie at mi. Nulla nulla lorem, suscipit in posuere in, interdum non magna.

MX Thermostatic Bar Shower Mixer Wall Plate Fixing Kit Concealed 6in 150mm or 46mm Centres

MX Thermostatic Bar Shower Mixer Wall Plate Fixing Kit Concealed 6in 150mm or 46mm Centres
MX Thermostatic Bar Shower Mixer Wall Plate Fixing Kit Concealed 6in 150mm or 46mm Centres
MX Thermostatic Bar Shower Mixer Wall Plate Fixing Kit Concealed 6in 150mm or 46mm Centres
Stock Code HLX

£16.99 Inc VAT

£14.16 Ex Vat

MX
Product not in stock
This product has no direct replacement

Make easy work of fitting a bar mixer shower with this handy fixing plate.
Quickly install accurate pipework for a firmly fitted shower.

Firmly clamps 15mm pipework accurately in place at 150mm centres, Comes complete with screws and brass fittings to connect to pipework and bar shower mixers.

Fitting Instructions for Wall Plate:

Identify all components before fitting and determine which valve is being fitted and the configuration needed.

The wall plate will fit valves requiring 150mm or 46mm centres between fittings.

The supply pipework can be plumbed from above, below or from either side but must finish at the suitable connections, which should be positions ‘A’ (150mm) or positions ‘B’ (46mm) depending upon the valve being fitting.

Fit elbows to back plate in positions A or B depending upon the type of valve being fitted, making sure the hot piping supply is to the correct position for the valve you are using.

NOTE: The screws are always fitted from the countersunk side of the wallplate.

Fitting support plate (Fig1&2), the plate needs to be sunk into the wall to a maximum of 52mm from the finish-tiled surface leaving a minimum of 10mm of thread exposed. (Fig 3) and attached by the corner screws to brickwork, stud work or batten connect the 15mm pipework to the compression elbow supplied.

EAN