Categories

  • No categories

A sample text widget

Etiam pulvinar consectetur dolor sed malesuada. Ut convallis euismod dolor nec pretium. Nunc ut tristique massa.

Nam sodales mi vitae dolor ullamcorper et vulputate enim accumsan. Morbi orci magna, tincidunt vitae molestie nec, molestie at mi. Nulla nulla lorem, suscipit in posuere in, interdum non magna.

MX Options Stream Thermostatic Exposed Bar Mixer Shower Valve with Large Overhead Including Diverter to Handset

MX Options Stream Thermostatic Exposed Bar Mixer Shower Valve with Large Overhead Including Diverter to Handset
MX Options Stream Thermostatic Exposed Bar Mixer Shower Valve with Large Overhead Including Diverter to Handset
MX Options Stream Thermostatic Exposed Bar Mixer Shower Valve with Large Overhead Including Diverter to Handset
Stock Code HMB_FFK

£89.99 Inc VAT

£74.99 Ex Vat

MX
Product not in stock
This product has no direct replacement

The MX Options Stream is both stylish and practical. The diverter valve gives the ability to choose between a multi mode personal showerhead and a large overhead. The separate flow and temperature controls create an easy and functional way to an invigorating shower.

- Fully Thermostatically Controlled
- Separate Flow and Temperature Controls
- Suitable for High and Low Pressure Systems
- Diverter Valve Complete with 6 Mode Showerhead
- 1 Year Replacement Guarantee

Fitting Kits are available for this product.

Minimum running water pressure: 0.1 bar, but will operate better at a minimum of 0.5 bar. Maximum running water pressure: 5 bar. Maximum static water pressure: 10 bar.

Includes a Fast Fit Easy Kit:

A fast fit fixing kit for bar valve showers aimed at easing the installation of bar shower valves. Removes the need for in wall support battens.
Reduced chance of in wall leakage as all joints are outside of the wall.
Suitable for all UK manufactured bar valves.

Fitting Instructions:

First check the thermostatic mixer valve (TMV) you are fitting has inlets at approximately 150mm centres and it has 3/4" thread fittings (Most showers do).

1. Fit inlet pipes in 15mm copper tube so the outlets are at 150mm centres using the template which is provided and the tube protrudes at 30mm +/1 2mm from the finished surface tile. The inlet pipes should be fitted to allow about 2mm adjustment in each direction with a hole through the tiles of approximately 20mm diameter.

2. Fit the wall plate over the copper tube and mark a suitable place to drill the holes. Drill the holes and fit the wall plugs then using the screw okate fit the screws to hold the wall plate lightly in the required position. The screw plate allows for some adjustment of the fittings to fit and level the mixer valve.

3. Fit the olive it should protrude by at least 4mm from the wall plate. Whilst holding the wall plate with a spanner (40mm) tighten up the chrome plated threaded adaptor with a 22mm spanner up to the adjustable screw plates so the olive seals on the 15mm tube.

4. Check the TMV fits to the wall plates and adjust for the level then tighten the screws. Fit the cover plates which will be provided with your thermostatic bar valve and attached the bar using the washers provided with the bar valve

Package Includes:

2 x Chrome Plated Threaded Adaptors
2 x Wall Plates
4 x Fixing Screws and Raw Plugs
2 x Olives
4 x Adjustable Screw Plates

EAN 5055995510763