Categories

  • No categories

A sample text widget

Etiam pulvinar consectetur dolor sed malesuada. Ut convallis euismod dolor nec pretium. Nunc ut tristique massa.

Nam sodales mi vitae dolor ullamcorper et vulputate enim accumsan. Morbi orci magna, tincidunt vitae molestie nec, molestie at mi. Nulla nulla lorem, suscipit in posuere in, interdum non magna.

Calmag Calsoft NE High Flo Non Electric Water Softener Twin Tank and 22mm Installation Kit

Calmag Calsoft NE High Flo Non Electric Water Softener Twin Tank and 22mm Installation Kit
Calmag Calsoft NE High Flo Non Electric Water Softener Twin Tank and 22mm Installation Kit
Calmag Calsoft NE High Flo Non Electric Water Softener Twin Tank and 22mm Installation Kit
Stock Code CALSOFTNE-HFK

£1,119.00 Inc VAT

£932.50 Ex Vat

Calmag
Product not in stock
This product has no direct replacement

 

CalSoft NE is a non-electrical ion exchange water softener. Water softeners are the only solution to eliminate limescale problems in hard water areas. Ion exchange is a simple process whereby calcium (limescale) is replaced by sodium (salt) in your water. This creates soft water. Our unit is one of the most economical softeners available.

Calsoft NE is as easy to install as a washing machine and comes with no flashing lights digits or confusing programmes. It has been designed to fit under a single kitchen cupboard. All the unit requires is an inlet outlet drain and overflow.

Water travels through the inlet to the bottom of the resin tank. It is then forced through the resin bed and calcium (limescale) particles are exchanged with sodium (salt) particles that are held on the resin beads. The softened water then passes through the oulet and supplies your home with limescale free softened water.

CalSoft NE is a twin resin vessel softener that will constantly supply softened water to your home. We normally recommend this unit where there is a high demand for softened water. After a pre-set volume of water has passed through a meter on the unit regeneration of the exhausted vessel will begin and water supply will switch to the other vessel. Once the resin vessel completes its regeneration process your water will continue to be softened by both resin tanks.

Regeneration process

The Basics of How a Water Softener Works

The Basics of How a Water Softener Works

1. Hard water passes though a control unit into the resin vessel.
2. Calcium and Magnesium constituents of water hardness are attached to the Sodium saturated resin beads usually sulphonated polystyrene.
3. This simultaneously releases Sodium ions and water hardness is
eliminated. The process is called ion exchange.
4. When the resin becomes saturated with Calcium and Magnesium it is recharged by passing a salt solution through the resin.

Key water softener parameters...
• Water hardness
• Litres of water used per day
• Maximum flow rate
• Fill rate to tank requirements

After Installation you should notice the following effects:

1. Existing scale on pipes and appliances will begin to break down upon contact with softened water. NB this process will take longer in your hot water cylinder.

2. The water in your central heating storage tank will become softened and as a result will begin to treat the boiler and pipework.

3. You should notice that you require less soap and detergents around your home as they mix much more effectively with softened water. In some cases you could reduce the amount of soaps and detergents you use by 75%.

4. After several months your hot water system will gradually become more efficient. Eventually you should be able to lower the water temperature and make considerable savings over the year.

CalSoft comes with a 5 year guarantee on parts and 12 months on labour.

Calmag recommend that there is always a separate water supply maintained for providing potable drinking water.

IMPORTANT NOTE
You may notice a hardness in your bath water a month or so after fitting a water softener. This is due to the descaling of your hot water cylinder this effect will gradually diminish over time.

You may also notice a slight green stain under taps. This is caused by poor quality pipework leaching into the water. It can be cleaned off with a proprietary cleaner.

We also recommend that you do not use steam irons with softened water as they are designed for use with hard water.

CalSoft NE comes with a 5 year guarantee on parts as standard.

EAN 5060055231199