Home > Tool Shop > Hardware and Consumables > Sealants Adhesives and Tape

Everbuild Silweld Waterproof Leak Repair Electrical Tape Black 3 Meter 2SILWELD X3

Everbuild Silweld Waterproof Leak Repair Electrical Tape Black 3 Meter 2SILWELD X3
Everbuild Silweld Waterproof Leak Repair Electrical Tape Black 3 Meter 2SILWELD X3
Everbuild Silweld Waterproof Leak Repair Electrical Tape Black 3 Meter 2SILWELD X3
Stock Code 2SILWELD3BK_3

£12.99 Inc VAT

£10.83 Ex Vat

Everbuild
In Stock - available for next day delivery
Stock Checked:
Quantity
Loading Updating parcel...
Estimated UK Delivery Costs - Per Order
Standard Delivery £2.95
Next Day Delivery £5.95
Royal Mail Logo

Small Product

More Information
International Delivery Options Available

Incredible Silicone Self Fusing Tape Silweld is the incredible new tape that can be used to repair almost anything from an emergency repair to a water garden hose or air pipe to insulating electrical wires or connections.

It creates an air tight, watertight seal in seconds without the need for any adhesive and it even works under water! Silweld also resists salt water, petrol, oils, acids, solvents and UV rays.

Silweld is an excellent electrical insulator up to 8,000 volts, it withstands extreme temperatures from -65 to 260ºC and even withstands pressure to 700psi.

Silweld is so diverse that it can be used for permenant or temporary repairs to just about anything: – U bends – All pipes and hoses – Electrical insulation & sealing electrical wires & connections – Binding rope ends – Corrosion protection – Hand and Garden Tool Grips and many more uses.

Limitations
Silweld starts fusing immediately upon application and is not re-usable.
Should you wish to reposition the tape, unwrap the tape within 30 seconds to re-use.

Application
Ensure surfaces are clean and free from dust.
Separate the tape from the liner and press the tape firmly onto the surface, starting at the repair
point. Work the tape to 3 to 4 centimetres either side of the repair, stretching while wrapping. To
ensure a good seal wrap the tape with a two thirds overlap, the tape should be stretched to twice its
original length, the longer the stretch the stronger the seal will be.
For non-pressure repairs it is advised to wrap the tape around at least 3 to 4 times, for pressure
repairs increase this to 6 to 7 times.

EAN 5055995540869