Home > Tool Shop > Hardware and Consumables > Sealants Adhesives and Tape

Everbuild Industrial Superglue HV 50grm Size Cartridge Triple Pack

Everbuild Industrial Superglue HV 50grm Size Cartridge Triple Pack
Everbuild Industrial Superglue HV 50grm Size Cartridge Triple Pack
Everbuild Industrial Superglue HV 50grm Size Cartridge Triple Pack
Stock Code HV50_3

£6.40 Inc VAT

£5.33 Ex Vat

Everbuild
Product not in stock

Product Description
EVERBUILD INDUSTRIAL SUPERGLUE HV is a high viscosity flash setting industrial adhesive based on advanced cyanoacrylate technology.

Benefits
 Flash setting formulation, bonds to most porous and non porous surfaces in seconds.
 Fills gaps up to 0.25mm
 Single component adhesive
 100% solvent free
 Economical in use

Limitations
 Ensure surfaces are degreased prior to bonding.
 Ensure surfaces are close fitting. This adhesive will not bridge gaps.
 Do not use on glass.
 Do not use in applications involving constant water immersion.
 Do not use on bitumen or tar leaching products.
 As the manufacturer cannot know all the uses its products may be put to, contact technical services for advice if in any doubt.

Application
The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times. Where possible, ensure working environment has a relative humidity of 50% +.

Apply adhesive to one surface only. Press surfaces together and hold for 10 seconds or as indicated below. Cure speed is rapid so exercise care when aligning.

EAN 5055995523909