Home > Tool Shop > Hardware and Consumables > Sealants Adhesives and Tape

Everbuild Aquaseal Wet Room Kit Joint Corner Tape Waterproof Sealing Tape Tanking Tape 5m

Everbuild Aquaseal Wet Room Kit Joint Corner Tape Waterproof Sealing Tape Tanking Tape 5m
Everbuild Aquaseal Wet Room Kit Joint Corner Tape Waterproof Sealing Tape Tanking Tape 5m
Everbuild Aquaseal Wet Room Kit Joint Corner Tape Waterproof Sealing Tape Tanking Tape 5m
Stock Code AQWRSTAPE5

£14.99 Inc VAT

£12.49 Ex Vat

Everbuild
In Stock - available for next day delivery
Stock Checked:
Quantity
Loading Updating parcel...
Estimated UK Delivery Costs - Per Order
Standard Delivery £2.95
Next Day Delivery £5.95
Royal Mail Logo

Small Product

More Information
International Delivery Options Available

Aquaseal Waterpoof Tanking Tape designed to provide a waterproof seal prior to tiling on board joints, corner joints and pipe entries in shower areas, wet rooms, wet zones and anywhere where a watertight seal to a corner, gap or crack is required.

It is a self adhesive joint and corner tape ideal for use when waterproofing showers, wet rooms and wet zones in bathrooms before tiling. A permanently flexible butyl backed fleece with cross directional stability, Waterproof Tanking Tape can be used on all board joints, corners and pipe entries.

Can be tiled directly or overcoated with Aquaseal Waterproof Tanking Membrane for full wet zones and is easy to apply with a pre-cut release liner.

The unique butyl fleece provides cross directional stability to accommodate board movements
occurring in different directions at the same time, essential to provide a permanent watertight seal.

Benefits
• Self-Adhesive
• Waterproof
• Permanently flexible butyl backed fleece with cross directional stability
• Easy to apply with pre-cut release liner
• Available as a larger size square Drain Mat for standalone showers.
Areas for Use
• For showers, wet rooms and wet zones in bathrooms
• For waterproofing before tiling
• Use on all board joints, corners & pipe entries
• Can be tiled directly or over coated with Aquaseal Tanking Membrane for full wet zones
Limitations
• Do not use on timber or boards treated with spirit or stearate based coatings
• Do not use in areas subject to high temperatures
• It is the user’s responsibility to determine suitability for use. If in doubt contact Technical Services
for advice.
Surface Preparation
All surfaces must be clean sound and dust free.
Application
On timber and plaster based boards and porous substrates prime using Aquaseal Tanking Primer
(where this is not available use a suitable SBR Bonding Agent, such as Everbuild 503 SBR Bond, diluted with 4 parts water) and allow to dry before applying. Remove the release liner progressively as the
tape is applied, smoothing down with a small roller (a radiator paint roller is ideal). Take care to avoid
rucks in the tape.
The liner is pre-cut along the length to allow one side of a corner to be applied and smoothed prior to
repeating the process on the other side of the corner. Ensure the tape is pressed carefully into the
corner before sticking the other side down to avoid stress on the tape in the corners. When joining
the tape, and on internal corners, ensure the tape is overlapped by at least 50mm onto the next
piece.
For sealing around drains and outlets use the self-adhesive Aquaseal Waterproof Drain Mat.
The tape can be over coated with Aquaseal Waterproof Tanking Membrane immediately after
application. On internal corners ensure the tape overlaps on both sides to avoid a weak spot in the
centre of the internal corner.

EAN 5029347611170