Home > Tool Shop > Cordless Power Tools > Cordless Tool Packages

Dewalt DCK6BLKIT3 18v XR 6 Piece Brushless Kit – DCD996, DCF887, DCG405, DCS391, DCS331, DCL040 with 3 x 5.0Ah Li-Ion Batteries, Charger and Carry Bag

Dewalt DCK6BLKIT3 18v XR 6 Piece Brushless Kit – DCD996, DCF887, DCG405, DCS391, DCS331, DCL040 with 3 x 5.0Ah Li-Ion Batteries, Charger and Carry Bag
Dewalt DCK6BLKIT3 18v XR 6 Piece Brushless Kit – DCD996, DCF887, DCG405, DCS391, DCS331, DCL040 with 3 x 5.0Ah Li-Ion Batteries, Charger and Carry Bag
Dewalt DCK6BLKIT3 18v XR 6 Piece Brushless Kit – DCD996, DCF887, DCG405, DCS391, DCS331, DCL040 with 3 x 5.0Ah Li-Ion Batteries, Charger and Carry Bag
Stock Code DCK6BLKIT3

£759.99 Inc VAT

£633.33 Ex Vat

Dewalt
Product not in stock

This XR Dewalt Brushless 6 Piece Kit, contains the following:

DCD996N XR Brushless Combi Hammer Drill
DCF887N XR Brushless Impact Driver
DCG405N XR Brushless Grinder
DCS391N XR Circular Saw
DCS331N XR Jigsaw
DCl040N XR Torch
3 X DCB184 5.0ah Batteries
1 X DCB115 Charger
Tool Bag

DCD996N XR Brushless Combi Hammer Drill Features

The DeWalt DCD996 combi hammer is the successor to the DCD995, with an improved, larger brushless motor which delivers up to 34% more power. DeWalt have improved the airflow to this motor which keeps it cool and at the top of its performance. It features an improved automatic high speed for increasing the users masonry drilling speed.

It has a 3-speed gear box giving you ultimate control over blows-per-minute and revolutions-per-minute. For example, in gear three while in hammer mode you’ll have 38,250 blows per minute while the chuck spins at 2,250rpm.

There's also a newly improved, 3-stage, bae-mounted LED worklight. It has a maximum brightness of 60 lumens, enough to light up a huge work area and even bright enough to use solely as a torch. There's a sturdy switch built-in to the drill base to control the brightness.

All metal nitro-carburised chuck prolongs life as it is stronger and rust resistant
Carbide inserts improve bit gripping strength and helps to minimise dropped bit frustrations
3 speed gearbox for a greater range of applications
Larger brushless motor than previous model gives up to 34% increase in power
Improved air flow to the motor keeps it cool under pressure
Hammer Function increases speed to 2250rpm giving increased productivity
Super bright base-mounted LED worklight with 3 LEDs which give a range from 2.6 to a massive 60 lumens

DCF887N XR Brushless Impact Driver Features

The DeWalt DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screw driving applications to avoid material and fastener damage. Fitted with a high power, brushless motor that is capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. It has a super lightweight and compact design that is very comfortable to use and fits in small spaces. The 3 LED, Halo light ring offers excellent work piece lighting.

Latest generation 18V XR Li-Ion Brushless Impact Driver.
3 Mode Impact selector improves user control.
Improved Brushless motor provides 28% increased torque.
135mm Overall length.
3 LED ‘Halo‘ ring provides maximum illumination of work piece
6.35mm ‘drop and load‘ hex bit holder allows for quick, one handed fitment
Aluminium front housing provides greater heat dispersion increasing motor life
Ergonomic handle and rubber overmold reduces vibration and user fatigue

DCG405N XR Brushless Grinder Features

The Dewalt DCG405 Brushless Angle Grinder has a no load speed of 9000rpm and a 125mm disc diameter.

18V Brushless motor for efficiency, improved application performance and power
Capable of x69 cuts in 1/2" steel rebar when used with 5.0Ah battery (sold separately)
Compact gear case for increased access to tight spaces and gives excellent cutting depth
Slide switch provides less user fatigue. Built in no-volt release gives protection against accidental start ups when new battery is installed
Electronic brake has braking time of < 2 seconds when the trigger is released to help reduce accidental contact and injury
Constant Clutch and E-Clutch protects from kickbacks, cuts and wheel bursts
Mesh Covers restricts dust being sucked through the motor
Ergonomic slim body with rubber over-mould for improved comfort and control
Two Position Side Handle offers greater comfort and control
1 or 2 touch guard for quick and easy keyless adjustment

DCS391N XR Circular Saw Features

The saw has a powerful and highly efficient PM58 DeWalt fan cooled motor with replaceable brushes which delivers 3,700 per minute for fast cutting action.

The ultra thin kerf 165 mm, 24 tooth carbide-tipped blade allows for efficient run time and fast, smooth cut finish at maximum 55 mm depth of cut with the intelligent trigger allowing total control over all applications.

The DCS391 has an extremely durable tool design, including a cast magnesium base for repetitive, accurate cuts, keyless bevel angle and depth of cut adjustment with easy to read scale for maximum cordless versatility, spindle lock for quick and easy blade change and has a lock off switch and electronic motor brake for additional control and work safety.

DCS331N XR Jigsaw Features

Latest generation premium Jigsaw featuring new XR Lithium Ion Technology.
Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster.
Powerful & Highly efficient DEWALT PM47 fan-cooled motor with replaceable brushes.
Delivers fast cutting action up to 3000 strokes per minute maximising user productivity.
Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety.
Tool-free adjustable shoe with anti-scratch cover bevels 45 degrees in both directions.
Quick and easy patented keyless blade change system, accepts T-shank blades.
Patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation.
3-position pendulum action controls the aggressiveness or smoothness of cuts.
Dust blower keeps line of cut clear of dust and debris.
Modular component design for trouble free servicing.
Rubber coated grip to reduce surface vibration and user fatigue.
Improved ergonomic design.

The Powerful & Highly efficient DEWALT PM50 fan-cooled motor with replaceable brushes which delivers fast cutting action up to 3000 strokes per minute maximising user productivity.
Tool-free adjustable shoe with anti-scratch cover bevels 45 degrees in both directions and quick and easy patented keyless blade change system, accepts T-shank blades.

DCL040N XR Torch Features

The DeWalt DCL040 is the latest generation 18 Volt Work Light, using LED Technology and featuring new XR Li -Ion technology. It has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip increase comfort.

The LED Bulb producing 110 Lumen output (10,000Hr Life) with a 2 Zone light pattern with the flashlight head pivots more than 90 degrees vertically with ratchet lock. The flashlight includes an integrated hook for hanging and can be used free standing, with belt clip.

 

EAN 5055995540982