Home > Tool Shop > Fixings > Brads, Nails and Staples

Dewalt DT99731RH-QZ Hot Dip Galvanised Ring Shank 3.1 x 75mm Nails – Box of 1100 Nails – DT99731RH

Dewalt DT99731RH-QZ Hot Dip Galvanised Ring Shank 3.1 x 75mm Nails – Box of 1100 Nails – DT99731RH
Dewalt DT99731RH-QZ Hot Dip Galvanised Ring Shank 3.1 x 75mm Nails – Box of 1100 Nails – DT99731RH
Dewalt DT99731RH-QZ Hot Dip Galvanised Ring Shank 3.1 x 75mm Nails – Box of 1100 Nails – DT99731RH
Stock Code DT99731RH-QZ

£43.70 Inc VAT

£36.42 Ex Vat

Dewalt
Product not in stock

DEWALT range of clipped head nails qualified to Eurocode 5 standard and covering Service classes 1,2 & 3.

A suitable nail available for any site environment.

A range of nails fully tested to work with the DEWALT framing nailer providing the best level of performance between nail and nail gun.

Not sure which nails you need? See our basic guide to nails below

Bright Nails are uncoated nails, susceptible to rust and corrosion, not used for exterior work.

In electro galvanised nails - the coarse zinc particles in the galvanised coating cling more tightly to whatever they're fastening and offer some corrosion resistance. Consequently, they perform well for attaching parts of house trim, decks, stairs and window frames.

Hot dipped galvanised nails are passed through a bath of molten zinc and have a heavier coating of zinc than electro-galv nails. They have a stronger barrier against corrosion so can be used outdoors in non-coastal areas.

Use stainless steel if there is a high risk of corrosion (e.g in coastal areas). To prevent streak or stain in certain timbers (e.g. cedar, redwood) use stainless-steel nails.

Dewalt Nails - the Basics Guide

EAN 5035048098349