Culligan Waterside Ultra S MC450 Ultra Hi-Flo
Comes complete with a Full Installation kit - Everything you need to install the unit no matter what system you have!

*Installation kit includes components you need to install on...
- Conventional vented system
- Combi Boiler
- Unvented System
- Pressurised System
- Megaflow System

....a saving of up to £60!

Part of the NEW Waterside MC Ultra S-Range of Water Softeners

The Waterside MC ultra S range of water softeners represents a significant step forward in water softener design. Its ergonomically designed cabinets sits comfortably in most kitchen environments and houses a host of sophisticated and efficient features, including 'back lit' liquid crystal display, electronic controls and an advanced rotary valve,

Designed for the 21st century, the Waterside Ultra S range has been developed to meet the demands of todays busy lifestyles. Each model delivers copious amounts of softened water, at flow rates designed to meet the demands of modern combination boilers, power shower and unvented of pressurised hot water systems.

Simplicity
Each model is comple to set up, install and operate and uses less water and salt than many other similar sized water softeners. The high level efficiency is due to our on-going design and development policy resulting in a design, which includes an innovative bed, high food grade monospheric resin, a rotary valve and an advanced memory electronic control system (AMECS).

'Choose the simplicity and convenience of block or cost efficiency of tablet salt...'

Easy Installation
The compact size of each unit makes choosing a location to site your new water softener even easier. Low voltage electrics makes it unnecessary in most cases to run an additional mains spur to the unit, instead a low voltage small diameter extension cable can be easily fed back back to an existing 13 amp socket up to seven metres away.

More Choice
The Waterside Ultra S range of water softeners is available in two sizes and gives you the option of choosing at the touch of a button between the simplicty and convenience of block salt of cost efficiency of tablet salt. Whilst an integral salt alarm takes away the need to remember when next top up the supply.

Designed for your home
The new Waterside range has been developed to blend in with its surrounding, wherever it is placed. Both models will fit inside a standard 600mm wide kitchen base unit; and in some caes the smaller unit even slides beneath a sink or drawer. Ergonomically designed, with clean smooth lines and pastel colours, the Waterside range will compliment a wide range of kitchen styles and rarely needs more than a quick wipe over to stay looking as good as new.

Sensitive to the environment
All water softeners regenerate periodically, using salt and water in the softening process. The Waterside Ultra S range incorporates a series of advanced processed to ensure that regeneration takes place only when necessary, saving sale, water and energy.

Proportional Brining
The integrated electronic control system monitors your softened water usage making only enough brine (salt solution) to regenerate that part of the resin bed that has been exhausted. In this way the amount of salt, water and energy consumed relates directly to the amount of softened water used, making it more efficient and cost effective.

'In some cases the smaller unit can even slide beneath a sink...'

Couter Regeneration
This means brine solution first passes through the unused resin at the bottom of the resin bed, ensuring that the whole bed is treated with no wastage. This reduces the amount of water used in the regeneration cycle.

Lifestyle monitor - for general efficiency
Day by say, hour-by-hour, the electronic control system captures data on the amount of water you and your family are using, and stores the information in its memory. Cleverly distinguishing between high usage days, usually weekends, and low usage weekdays, it will only regenerate when neccessary, saving salt, water and energy whilst ensuring you still have the correct amount of softened water on tap at the start of each day.

Standards

WRAS Approved components
Test in accordance with European Standard CEN 164
CE Approved
Pressure Directive Approved
All Valves Wet Tested Prior to Despatch
Complete with Installation kit.



Installation kit Includes
22BYPASS x 1 - 22mm bypass valve
22INVA x 1 - 22mm inlet valve
22OUTVA x 1 - 22mm outlet valve
22REDCOUP x 3 - 22mm reducing coupling
3/4NORE x 1 - 3/4" non return valve
HFHOSE x 2 - Hi Flo Hose
DRHO x 1 - Drain Hose
JUCL x 1 - Jubilee Clip
CS002020 x 1 - 3/4 overflow connector
16023 x 1 - Transformer
TEBOXW x 1 - Test Kit Box Waterside
TETAB x 20 - Test Kit Tablets
TEBO x 1 - Test Kit Bottle
HOWA x 4 - Hose Washer
MCSINST 1 - MCS Instructions
16000NB x 4 - O Ring for straight connector


Advanced Features at a Glance

Compact sizes - designed and developed for UK homes.
Constant flow rates for power showers and multiple bathroom applications.
Accurate performance figures*** for simpler sizing.
Block or Tablet salt model Including low salt alarm.
Advanced rotary valve for greater reliability - 99.7% Valve reliability **.
Advanced electronic control system.
Eco sensitive proportional brining for greater efficiency - saving water and salt.
One touch access to data logging provides information such as water flow rate and water
usage between regenerations.
Low voltage small diameter cable for safety and easy installation.
High capacity monosphere resin with regular bead size for the maximum amount of
softened water between regenerations.



'Ultra S a significant step forward in water softener design...'

Model	MC450 Ultra S 10 Litre Water Softener	MC550 Ultra S 14 Litre Water Softener
Valve Control System	Electronic Meter	Electronic Meter
Valve Type	Rotary	Rotary
Salt Type	Block/Tablet	Block/Tablet
People Days Capacity *****	10	16
Proportional Brining	Yes	Yes
Salt used per Regeneration* Min/ Max Kg	0.3/1.4	0.6/2.2
Flow Rate* Min / Cont. / Max	10 / 30 / 50	10 / 35 / 50
Nominal Flow Rate***	24	28
Water used Per Regeneration	<80	<90
Salt Storage Capacity Kg Block/Tablet	8 / 15	8 / 20
Capacity Litres	10	14
Maximum Softened Water Capacity litres	1667	2500
Maximum Working Pressure Bar	5	5
Minimum Working Pressure	1.7	1.7
Electrical supply /Transformer	230 AC / 12 DC	231 AC / 12 DC
Inlet /outlet Straight Connectors	3/4"	3/4"
Drain Connection	1/2"	1/2"
Height mm	532	602
Depth excl. fittings	480	480
Width mm	270	270
Part Number	MC450S	MC550S

* Flow rates are from 10 and up to a peak of 50 litres a minute. At flow rates under 10 litres per
minute; the hardness may not be effectively removed from the water. If peak flow rates are
sustained for longer than ten minutes the softener capacity may be reduced resulting in hard water
break through.
** The proportional brining control system calculates the exact amount of water and salt required to
regenerate the Water softener the amounts used will vary depending on the remaining capacity of
the resin bed
*** Calculated in accordance with CEN 164
**** Test Data analysis January August 2007
***** Calculated using softener capacity / 160 litres per day.

---------------

Remember to order your Salt Tablets with your Water Softener!

1 x Water Softener Salt Tablets 25kg Bag 5 x Water Softener Salt Tablets 25kg Bag 10 x Water Softener Salt Tablets 25kg Bag 15 x Water Softener Salt Tablets 25kg Bag